Description
Overview
The Polyflor ESD range has been specifically engineered to combat electrostatic discharge at source by facilitating a uniform flow of static electricity directly to ground point.
All Polyflor ESD floorcoverings are homogeneous in construction, to ensure that these properties are present throughout the product, guaranteeing a consistent and effective appearance and performance.
Homogeneous vinyl flooring manufactured in Europe achieves A+ BRE rating. Polyflor ESD is 100% recyclable and contains 25% recycled material.
Polyflor Static Dissipative products are engineered for use where static control is required.
Downloadable Assets
BoQ Specification
Supply and install install Polyflor Finesse SD flexible PVC sheet flooring with static dissipative properties in 2.0mm thickness, it shall be homogeneous and monolayer in construction, the static dissipative properties must be present throughout the full product thickness, the flooring shall conform fully with the requirements of EN 649, earthed to a minumum of two ground points,and installed with a Polyflor recommended conductive adhesive which has been spread using an A2 notched trowel on a previously prepared Class 1 subfloor in accordance with SANS 10070, using a Polyflor recommended self-leveller and moisture barrier when required, including cutting and waste, rolling the installed planks/tiles in both directions with a 68kg three-sectional roller immediately after it has been laid into the adhesive, joints must be butted joined, available from Polyflor (011) 609 3500.
- Colour: Woodglade
- Code: 5840
- Weld Rod: 5240
Technical Product Compliance
- Hardwearing homogeneous contract sheet and tile floorcovering
- Static dissipative properties
- Engineered for ESD protection
- BRE Global Generic A+ rating
Comprehensive Specification
Supply and install Polyflor Finesse SD flexible PVC sheet flooring with static dissipative properties in 2.0mm thickness, it shall be homogeneous and monolayer in construction, the static dissipative properties must be present throughout the full product thickness, the flooring shall conform fully with the requirements of EN 649, in respect of flame spread, the flooring shall have been fully tested to EN 13501-1 and certified as having Class Bfl-S1, achieving the criteria EN ISO 9239-1 ≥8kw/m2 and the mandatory requirement of EN ISO 11925-2 pass. It shall be tested to ASTM E648 and certified as having passed with a Class 1 rating, making it suitable for use in institutional, commercial, and public buildings. Tested to ASTM E662, the flooring shall be <450, with regard to EN 13893 for slip resistance, the flooring shall be classified DS. It shall also be classified R9 for DIN 51130 making it suitable for use in areas which are predominantly dry, but with occasional spillage, the product must have been fully tested for abrasion resistance to the Frick Taber test EN 660: Part 2 and be in abrasion group P, as defined in EN 649, with regard to static dissipative properties, the flooring must conform to the requirements of IBM specifications. When tested to EN 1081 R1/R2 the flooring must have a resistance of<109 ohms. When tested to ESD S7.1, the flooring must have a resistance of between 1×106 to 1×109 ohms. Tested to BS IEC 61340-4-1 2003 RG, the flooring must have a resistance between 1×106 to 1×109 ohms, in accordance with EN 649, the in-use classification must be at least 34/43 as defined in EN 685: i.e., commercial areas with very heavy use; and light industrial areas with heavy use, the flooring must possess a valid Agrément certificate rating the product G5ws when laid in accordance with the instructions of Polyflor, with coved skirting and welded joints, the flooring must be available in 2.0 metre width, to minimise the number of joints, in respect of light fastness, the flooring shall have been fully tested to ISO 105-B02 Method 3 and obtain ≥6
- Colour: Woodglade
- Code: 5840
- Weld Rod: 5240